E805 Powercube 200
The ENGL Powercube 200 is a full-range, pedalboard-ready power amp that turns your favorite preamp, modeler, or amp-in-a-box into a stage-ready rig – without the weight of a traditional tube head.
This compact Class D power stage delivers 200 watts of clean, transparent headroom into a footprint that fits right on your board. Plug in your preamp of choice, dial in your tone, and let the Powercube 200 push it through any cab, FRFR speaker, or PA – faithfully, and without coloring what you’ve already dialed in.
The Powercube 200 is a no-compromise solution for modern, flexible rigs backed by the engineering and reliability ENGL Amplifiers has built its reputation on for over four decades. Lightweight, road-ready, and endlessly versatile, it carries your tone exactly where you need it to go.
Features:
- Widerange Powersupply from 100V AC to 240V AC
- 200W maximum power output (4 Ohm min. load)
- DI balanced output
- Switchable 3 band EQ with addititonal presence control
- EQ can be switched off
Controls:
- Bass: Bottom end voicing control of the preamp´s active EQ (+/- 12 dB).
- Middle: Mid-range voicing control of the preamp´s active EQ (+/- 12 dB).
- Treble: Upper range voicing control of the preamp´s active EQ (+/- 12 dB).
- Presence: Presence range voicing control of the preamp´s active EQ (+/- 12 dB).
- EQ On/Off: Engaging this switch bypasses the 4-Band EQ, allowing the signal to pass uncolored and enabling quick comparison between the processed and the direct sound.
- Master: This control sets the overall output level of the power amplifier and thus determines the volume at the speaker output.
Specifications:
- Mains Voltage: 100 - 240VAC 50 - 60Hz
- Power consumption: approx. 400W max.
- Switch Mode Power Supply (SMPS): thermal protection, over-current protection
- Protection: clip limiting, thermal, over-current/short-circuit, DC output
- Minimal Load: 4 Ω
- Power Output: 130W @ 8 Ω, 200W @ 4 Ω
- THD: < 1% @ RMS Power
- Signal-to-noise ratio (SNR): > 85dB
- Noise: -65dBu
- Input Sensitivity: (EQ Bypassed, MASTER set to max) -20dBV
- Input Impedance: 10kΩ
- EQ Sensitivity: Low ±12dB @88 Hz / Mid-range ±12dB @620Hz / High ±12dB @4KHz / Presence ±12 dB @12KHz
- DI XLR Balanced Output: Sensitivity -10dBV / Pin Assignment PIN 1 = GND, PIN 2 = sig+, PIN 3 = sig / Output Impedance - GND Lifted 1 KΩ
- Dimensions (H x W x D): 74mm x 161mm x 183mm / 2.91 x 6,33 x 7.20Inch
- Weight: 1.02kg / 2.25lbs
