Beetronics FX Wannabee Beelateral Buzz - Limited Edition DARK

Wannabee
Beelateral Buzz.

A dual overdrive inspired by the Bluesbreaker and Klon — done in a way only Beetronics could do.

Each side features its own voicings and controls, but the heart of the pedal is its routing system. You can stack the drives in series or run them in parallel — a rare feature that opens up a wide range of tones, from focused gain to rich, layered textures.

It’s called the Wannabee because it wants to bee like those classic pedals... but with a twist that’s unmistakably Beetronics.

Bluesbreaker + Klon Inspiration
Two distinct circuits with complementary voices — one smooth and dynamic, the other tight and punchy.

Series or Parallel Routing
Stack them for saturation, or run them side-by-side in parallel for wide, articulate tones.

Full Control on Each Side
Three-way voicing switches, Honey (gain), Taste (tone), and Volume knobs per circuit — plus dedicated footswitches for each.

Controls:

• Honey - Adjusts the Gain/Drive level for that specific circuit.
  
• Taste - Adjusts the Tone/EQ frequency response.
  
• Volume - Controls the output Level of that side.

Toggle Switches:

Voicing Switch
Each overdrive circuit has its own dedicated 3-way toggle switch positioned at the bottom to alter its fundamental character

Bluesbreaker (Circuit #0):

• 1: Mid Boost – Pushes the midrange frequencies forward to cut through a mix.
  
• 2: Flat – Provides a transparent, traditional Bluesbreaker frequency response.
  
• 3: Low Boost – Fatten up the bottom end for a bigger, warmer saturation.

Klon (Circuit #1):

• 1: No Clean Blend – Pure overdrive tone with the Klon's characteristic dry-signal blend completely removed.
  
• 2: Medium Blend – The standard, legendary Klon mix behavior that balances clean headroom with clipping grit.
  
• 3: Full Clean Blend – Maximizes the transparent clean signal, turning the pedal into a pristine, high-headroom boost.

Routing Switch
Located at the top center of the pedal, this switch dictates the structural workflow and interaction between the two sides

• Center: Both circuits runs in Parallel.
  
• Left: Stacks Circuit #1 (Klon) into Circuit #0 (Bluesbreaker) in series.
  
• Right: Stacks Circuit #0 (Bluesbreaker) into Circuit #1 (Klon) in series.

Specifications:

• Pedal Type: Analog, Dual Overdrive.
  
• Signal Path: 100% Analog.
  
• Bypass Switching: True Bypass.
  
• Power Requirements: 9V DC power supply, center-negative polarity (cannot be battery-powered).
  
• Current Draw: 30mA.
  
• Enclosure: Steel housing with signature custom bee aesthetics.
  
• Dimensions: 5.5" x 4.0" x 2.5" (14.0 x 10.2 x 6.4 cm).
  
• Weight: 1.1 lbs (0.5 kg).