Electro-Harmonix Pico Triboro Bridge

Attribute:

Overdrive, Distortion & Fuzz

Share

 

 

Pico Triboro Bridge
Bridging the worlds of overdrive, distortion, and fuzz in a sub-compact pico chassis!

The EHX Pico Triboro Bridge is a tri-mode drive box with a wide range of tonal possibilities. Featuring Overdrive, Distortion, and Fuzz modes, it bridges any gap in your gain. With a powerful EQ, input contouring, and a pico-sized footprint, the Triboro Bridge can be your tonal keystone or a welcome change from the routine drive.

Starting with Overdrive mode, the gain spectrum ranges from low to mid with an open voicing that can be used as a light always on drive or a solo boost. Engage the Triboro’s Distortion mode for additional gain-staging for a tone from crunchy rhythms to fully saturated leads. Transform the pedal into something completely different with the Fuzz mode’s over-the-top gain, Gate and Low Pass Filter.

The Triboro Bridge controls features Volume and Gain knobs to control the overall output and saturation of the tone. In Overdrive and Distortion modes, the Treble and Bass knobs act as a Baxandall EQ for simple yet effective tone shaping. In Fuzz mode the Treble knob is now the gate more, controlling the Fuzz’s noise gate threshold, and the Bass knob controls a Low Pass Filter for extreme tonal variations. Additionally, the Triboro Bridge features an Input Contouring EQ which can be applied to your tone at the input, for a more modern, sculpted tone in all modes.

Controls:

1. VOL: Controls the output volume.
2. GAIN: Controls the amount of saturation. Note: when Gain is maxed out in fuzz mode, the Triboro Bridge will make a lot of noise when you’re not playing. Either activate the Gate knob or dial back the Gain knob.
3. BASS/GATE: In overdrive and distortion modes, this knob is a bass control, allowing you to boost or cut low frequencies. In fuzz mode, this knob controls the threshold of a noise gate. Note: when first switching to fuzz mode from a different mode, the gate is initially deactivated until you move this knob.
4. TREBLE/TONE: In overdrive and distortion modes, this knob allows you to boost or cut high frequencies. In fuzz mode, this knob controls the cutoff frequency of a resonant low-pass filter.
5. TYPE Button: Press this button to choose your saturation mode:

  • Green – OVERDRIVE
  • Orange – DISTORTION
  • Red – FUZZ


Specifications:

  • Circuit : Digital
  • Bypass : Buffered Bypass
  • Audio : Mono
  • Power Supply : 9.6VDC-200mA power adapter included
  • Dimensions (in) : 3.65 x 2.0 x 2.0
  • Current Draw : 100mA
เว็บไซต์นี้มีการใช้งานคุกกี้ เพื่อเพิ่มประสิทธิภาพและประสบการณ์ที่ดีในการใช้งานเว็บไซต์ของท่าน ท่านสามารถอ่านรายละเอียดเพิ่มเติมได้ที่ นโยบายความเป็นส่วนตัว  and  นโยบายคุกกี้