Four to One Mixer
The EarthQuaker Devices Four to One Mixer sums up all your sound sources, including electric guitars, acoustic guitars, basses, and other instruments, and sends them all to a single destination. With Level controls and Phase switches to correct out-of-phase issues for each input, the Four to One Mixer puts you in the driver’s seat of your final outgoing mix. The consensus among the many musicians here at Sweetwater regarding the Four to One Mixer is that every music source sounded great despite the extended cable length used, thanks to its buffered inputs and output. Combine this with other devices, such as the One to Four Splitter or the Flexi Loops, to further expand on your otherworldly sonic experiments. Let the Four to One Mixer be your destination for all your imaginative signal chain designs!
Controls:
- Phase: Use this to select the output phase of the channel. Sometimes other pedals and various instruments will invert the phase of the signal which causes major problems when mixing with other non-inverted signals. If you have a signal that is inverted, flip the phase switch to “–” and the polarity will be corrected. In most cases this switch should stay in the “+” position.
- Level: Adjusts the output volume of the channel.
Features:
- Stompbox-size mixer directs up to 4 separate inputs into a single output
- Buffered inputs and output clean up each signal with high 1-Mohm input impedance and low 100-ohm output impedance
- Independent Level controls dial in the perfect mix for each incoming sound source
- Independent Phase switches correct polarity issues of each input
- Can be used in conjunction with the One to Four Splitter and Flexi Loops pedals to create complex signal chains that sum up into 1 amp
TECH SPECS:
- Dimensions : 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
- Current Draw : 50 mA
- Input Impedance : 1 MΩ
- Output Impedance : 100 Ω
- Power : This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!
