Earthquaker Devices Limited Edition Afterneath V3 Reverberator Pedal, Illusion Lite Blue Magenta


Afterneath V3


แบรนด์ : EarthQuaker


  • Dimensions: 4.75 x 2.50 x 2.25 in. (121 x 64 x 57 mm) with knobs
  • Current Draw: 100 mA (standard 9-volt DC power supply)
  • Input Impedance: 1 MΩ
  • Output Impedance: 500 Ω
  • Expression Jack - This is an expression pedal control jack for the Drag. The Afterneath requires an expression pedal with a value of 50k, we recommend the Moog EP-3 or similar. While it will work with a standard 10k expression pedal, a 50k expression pedal will allow you to access the full range of each mode.  Tip is the wiper, Ring is 5v and Sleeve is ground. You can also use CV with this jack. CV operates 0-5v.
  • Flexi-Switch® Technology - This device features Flexi-Switch Technology! This electronic switching style allows you to simultaneously use momentary and latching style switching.
  • The Afterneath uses an electronic buffered bypass, it requires power to pass signal and the buffer is always active. You may experience a pop the first time the Afterneath is switched on after it is powered up.
  • Tails / No Tails Switching - The Afterneath is factory set in tails mode. This means that the wet signal will naturally decay and slowly fade to silence after the effect is switched off. This can be deactivated internally.
เว็บไซต์นี้มีการใช้งานคุกกี้ เพื่อเพิ่มประสิทธิภาพและประสบการณ์ที่ดีในการใช้งานเว็บไซต์ของท่าน ท่านสามารถอ่านรายละเอียดเพิ่มเติมได้ที่ นโยบายความเป็นส่วนตัว  และ  นโยบายคุกกี้