Out of stock
500W Active Modeler/Profiler Monitor;
The Friedman ASM-10 active guitar monitor is your compact, onstage modeling solution. By combining a high-end, 1 x 10” speaker cabinet with 500 watts of clean, analog power, and putting it into a familiar and elegant design, the ASM-10 pushes the tone of your favorite modeler through the air while blending seamlessly with the rest of your rig. And thanks to the cabinet’s tilt-back floor monitor design, it easy to ensure you’re hearing every nuances of your playing as clearly as possible. If you utilize amplifier modeling in your performances, but need the immediacy and feel of a real speaker pushing air, the Friedman ASM-10 2-way, 500-watt powered monitor is what you’ve been missing.
Classic design with onstage convenience:
With the ASM-10, you’re able to position the cabinet anywhere you want onstage while still hearing your every note. Its tilt back design allows it to be placed comfortably in front of you, delivering your sound right to your ears. Or place it behind you in the traditional location for amplifiers, and its guitar-cabinet look blends right in with the rest of your backline.
● Tilt-back design allows for optimal onstage placement
● Looks like a traditional cabinet when placed vertical
Plenty of power:
The heart of the ASM-10 active guitar monitor is its all-analog, bi-amped Class-G power section. Plenty of care was taken to choose the highest-quality materials for reliability and sonic clarity in designing this amplifier. As soon as you plug it in, your ears are greeted with warmth and detail that leave PA-style monitoring far behind. And at 500-watts, you’ll wield plenty of power for any performance.
● All-analog, Class G circuitry engineered for rich and pristine tone
● Bi-amped into a 10” Celestion TF1025E woofer and 1” compression driver
● Powerful enough to also be used as backline or a mobile PA
Around back, you’ll find all the straightforward control you need to tailor your ASM-10 to any situation. A simple level control and Low Cut switch keeps your frequencies and volume balanced. Parallel XLR and ¼” TRS connections allow either jack, when not being used as an input, to serve as a balanced line level output to another monitor.
● XLR and ¼” inputs allow for different connectivity needs
● Low Cut switch controls frequencies below 100Hz
● Level control for proper onstage gain staging
Dave Friedman knows tone:
Dave Friedman has been building one of the most stellar reputations in the guitar, amplifier, and effects industry for decades. His clientele – which includes some of the biggest names in electric guitar – continue to rely on him to keep them sounding their best night after night. When he puts his name on a piece of gear, you know it will get the job done.
● The Friedman name is synonymous with high-quality electric guitar products
● Crafted with the finest materials for flawless performance
● Every unit is inspected and tested before shipping
- Configuration: 10” 2-Way Active Stage Monitor for use with modelers/profilers
- Assembly: Made in USA using premium worldwide components
- Low Frequency Transducer: Celestion – 10” TF1025E woofer
- High Frequency Transducer: Celestion PETP film compression driver with 1” voice coil
- Frequency Range: 50Hz – 20kHz
- Frequency Response: 58Hz -18kHz
- High Frequency Dispersion: Optical Wave Guide
- Maximum peak SPL: 129dB
- Power Output: LF: 270Wrms Class G / HF: 80Wrms Class AB+B
- Maximum total burst power*: 500W
- Input Impedance: 20k Ohm Balanced / 10k Ohm Unbalanced
- Electronic Crossover: 4th order
- Low Cut Filer (switchable): 3rd order Butterworth @ 100Hz
- Controls: Level knob , Low-cut filter switch, Ground lift switch
- Power switch, AC fuse, 115/230V switch
- Indicators: Power, Protect
- Cooling: Convection
- Amplifier Protection: Short circuit, Clip-limiter, Overheat mute, SOA output stage, Driver DC protection, Subsonic filter, Turn-on mute and soft ramp, Turn-on inrush current limiting
- Power Consumption @: 1.7A/0.85A 115Vac/230Vac
- (1/8 power pink noise): 150VA
- Connectors: Balanced 1/4” input / Balanced male XLR link output
- Input Sensitivity **: 775mV (0dBu)
- Enclosure: Black Texture painted, Baltic birch plywood construction
- Hardware: Strap handle, Rubber feet / Rubber Strips
- Dimensions: 20.5” H x 15.25” W x 13.25” D
- Weight: 40.9 lbs.