EarthQuaker Devices Black Ash
Out of stock
Limited to 1500 units worldwide, Black Ash is a fuzz/overdrive that takes some cues from the vintage “three-knob Bender.” It uses a highly curated cache of rare and irreplaceable components including paper-in-oil capacitors and NOS half-watt carbon composition resistors from EQD President Jamie Stillman’s personal stash to light a fire under this classic fuzz/drive with an explosive-yet-detailed treble response, a sturdy midrange, and subterranean bass extension.
- Fuzz: Adjusts the amount of gain. Counterclockwise for less fuzz, clockwise for more fuzz.
- Top: Adjusts high frequencies between 2kHz – 10kHz and controls how “forward” the guitar sits in the mix. Counterclockwise for less top, clockwise for more top.
- Level: Sets the output volume. Counterclockwise is quiet, clockwise is loud.
Measures: 4.75″ x 2.50″ x 2.25″ with knobs
Current Draw: 20mA
Input Impedance: 100K Ohm
Output Impedance: 22K Ohm
This device is true bypass and uses electronic relay-based switching. Audio will not pass without power.
This device takes a standard 9 volt DC power supply with a 2.1mm negative center barrel. We always recommend pedal-specific, transformer-isolated wall-wart power supplies or multiple isolated-output supplies. Pedals will make extra noise if there is ripple or unclean power. Switching-type power supplies, daisy chains and non-pedal specific power supplies do not filter dirty power as well and let through unwanted noise. DO NOT RUN AT HIGHER VOLTAGES!