Electro-Harmonix Q-Tron Plus

Attribute:

Envelope Filter with Effects Loop

Share

 

 

 

 

Q-Tron Plus
The classic Q-Tron gets even funkier!

Same design as the original EHX Q-Tron but with extremely useful Effects Loop and an Attack Response Switch. The Effects Loop gives the musician the ability to place an additional effect, or chain of effects between the EHX Q-Tron Plus’s preamp and filter section without changing the envelope drive. This is particularly important with most distortion devices, as most all do not have much of an amplitude envelope. The FX loop will also fire up your creative juices to try all sorts of combinations in the effects loop: try the Micro POG into a Deluxe Memory Man. You can invent all sorts of novel effects. The added Response Switch selects between a slow, smooth, vowel-like attack and the fast, snaked response of the original Q-Tron.

Controls:

1. Gain Control: In normal mode, the gain control acts as a filter sensitivity control and has no effect on the unit’s output volume. In Boost mode, the Gain control functions as both a volume control and the filter sensitivity control.
2. Boost Switch (Normal/Boost): Normal mode passes input signal through the filter at its original level. Boost mode increases the signal gain to the filter according to the Gain control setting.
3. Response Switch (Fast/Slow): Changes the sweep response between two optimized settings. “Slow” response creates a smooth vowel-like response. “Fast” response produces a snappy response identical to the original Q-Tron.
4. Drive Switch (Up/Down): Selects the direction of the filter sweep.
5. Range Switch (Hi/Lo): Emphasizes vowel-like sounds in low position and overtones in high position.
6. Peak Control: Determines the resonance peak or Q of the filter. Turning the control clockwise increases the Q and creates a more dramatic effect.
7. Mode Switch (LP, BP, HP, Mix): Determines what frequency range the filter will pass. Emphasize bass with Low Pass, midrange in Band Pass and treble with the High Pass. Mix mode combines BP with the dry instrument signal.


Specifications:

  • Circuit : Analog
  • Bypass : True Bypass
  • Audio : Mono
  • Effects Loop : Yes
  • Power Supply : 24VDC-100mA power adapter included
  • Dimensions (in) : 5.75 x 4.75 x 2.5
  • Current Draw : 35mA
เว็บไซต์นี้มีการใช้งานคุกกี้ เพื่อเพิ่มประสิทธิภาพและประสบการณ์ที่ดีในการใช้งานเว็บไซต์ของท่าน ท่านสามารถอ่านรายละเอียดเพิ่มเติมได้ที่ นโยบายความเป็นส่วนตัว  and  นโยบายคุกกี้